Блок питания "NEW" Pelco MCS4-2E Master Camera Power Supply 24VAC — продавец №5951664

New I still have 2 more Pelco MCS4-2E Master Camera  Power Supply 24VAC – 2 A – 4 Out / Fuse 2 Amp Capacities 4 Outputs Fuse or Circuit Breaker Protection; Spare Fuses Included with Fused    Models Only 120 VAC or 230 VAC Selectable Input 24 VAC Output or 28 VAC Output for Longer Wire Runs AC Power Indicator with Power On/Off Switch Compatible with Cameras, Domes, and Pan/Tilts Models with Circuit Breakers Have Class 2 Rated Outputs Power supplies in the MCS Series offer a variety of configurations for powering up to 16 units from a single power source. The power supplies provide 24 VAC output for 4, 8, or 16 units. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available on most models. The power supplies have a selectable input of 120 or 230 VAC and are packaged in an easy-to install metal enclosure that has ample room for wiring connections and conduit entries. For integrated systems such as Spectra« and Esprit« the higher capacity models are capable of handling pan/tilt and receiver operation in addition to camera functions. Models are available with either fuses or self-resetting circuit breakers on each output. Fused models provide a greater degree of protection for the camera because they are faster acting and more precise. Circuit breakers will self-reset when the fault is corrected, eliminating the need for replacing fuses. However, the amount of current required to trip a circuit breaker can vary as much as 100% depending on temperature. In the fused models, the values of fuses can be changed depending upon the specific current requirements of the equipment connected.This is a popular feature in larger systems where it is frequently necessary to power-down individual units. Note : 15-Day Warranty on all items If the item is defected, the same one will be exchanged, no refund Buyer outside the USA has to pay all   return shipping cost