Анализатор KH-UCANFD-PRO-X2U 2-Channel USB to CANFD Analyzer 3000V Electrical Isolation — продавец №8453565

Description Introduction: The current documented P/Ns are KH-UCANFD-PRO-X2U and KH-UCANFD-PRO-X4U, with two and four independent channels respectively. The 3000V isolation specification on this page applies to the current documented X2U / X4U products. For an earlier delivered unit, confirm its P/N and the specification supplied with that unit before applying these figures. The PRO series has a metal enclosure, protective end caps and two DB9 connectors. Each X2U connector carries one channel; each X4U connector carries two channels. Highlights: Two channels, one DB9: One compact connector carries CAN1 and CAN Mbit/s CAN FD: Both channels support full-rate operation. Built-in termination: Switch with the user button and confirm with RES LEDs. 1500 V isolation: Separates the host from the CAN network. Compact enclosure: 86.0 x 42.5 x 20.5mm with integrated USB-A cable. ISO and Non-ISO CAN FD: ISO CAN FD and the earlier Non-ISO CAN FD format are not fully compatible. X2U and X4U support both modes; the adapter, target nodes and host software must use matching modes, rates and sample points. CAN FD supports classical CAN 2.0A/B communication, but CAN FD extensions cannot be used on a classical CAN network. Typical Applications: Synchronized acquisition, diagnosis and replay on multiple CAN FD buses. Vehicle and controller debugging, including BMS, VCU and chassis networks. Robot and industrial-network debugging. High-load CAN FD acquisition and stress tests. Automated test benches, production validation and long-term recording. Technical Specifications: Channels:   X2U: 2   X4U: 4 Host interface: USB 2.0 High-Speed, up to 480Mbit/s, USB-A CAN connectors:   X2U: one channel per DB9   X4U: two channels per DB9 CAN protocols: CAN 2.0A/B, ISO and Non-ISO CAN FD Arbitration rate: 25kbit/s to 1Mbit/s Data-phase rate: 25kbit/s to 12Mbit/s Channel operation: All channels can operate at high load simultaneously Payload and identifiers: CAN FD payload up to 64 bytes; 11-bit stan